/  HT Motors and Protection Methods For Future
Pay Attention Please ! The course location "Champs Elysees" is subject to availability . We may change the course location if there is no availability and we will let you know about the location changing directly if it changes. The exact course time will be clear before one week prior to course start date.
BMC Training provides on 28 Oct 2018 HT Motors and Protection Methods For Future course [Electrical and Power Engineering Training] in Paris,France

Course Description

It is estimated that electrical drives and other rotating equipment consume about 50% of the total electrical energy consumed in the world today. The cost of maintaining electrical motors can be a significant amount in the budget item of manufacturing and mining industries. This course gives you a thorough understanding of electrical motor's working, maintenance and failure modes and gives you the tools to maintain and troubleshoot electrical motors.

You will gain valuable insight into the selection of the protection necessary to ensure your motors are protected against fault conditions, so as to ensure reliability and long life. Typical applications of electric motors in mining, manufacturing, materials handling and process control are covered in detail. You will learn the basic steps in specifying, installing, wiring and commissioning motors. The concluding section of the course gives you the fundamental tools in troubleshooting motors confidently and effectively.

Course Objective

This course is designed to enable participants to:

  • Understand AC motor operation and construction.
  • Overview different types of motor duties.
  • Read & explain the motor NP data.
  • Motor de-rating factors.
  • Specify, select and install motors.
  • Specify speed control requirements for motors.
  • Interpret motor performance curves
  • Electrical motors in Hazardous area.
  • Install and commission motors
  • Fix faults on motors.
  • Specify protection requirements for HV motors.

Course Outline

Review of Fundamentals/Basics

  • Resistors, Ohm’s Law, Capacitors, dielectrics, magnetic field, Ampere's law, Faraday's law, inductance, and alternating currents.

Introduction to Different Types of Electric Motors

  • DC motors.
  • AC motors (1-Ph & 3-Ph).
  • Induction Motors.
  • Synchronous motors.
  • International Codes and Standards.

Fundamentals of Motor Technology

  • Basic construction and physical configuration, windings.
  • Principles of operation and performance.
  • How the motor produces torque.
  • Theory of operation.
  • Basic principles of rotating electric machines.
  • Fundamental principles of speed control.
  • Efficiency, torque, inertia, horsepower/power factor.
  • Torque-speed curves.
  • Motor Losses & Efficiency.
  • Induction motor design.
  • Duty cycles.
  • Insulation and Cooling requirements.
  • Selecting motors.
  • Classified Ex motors.
  • De-rating Factors (Temperature, altitude, …).
  • Voltage unbalance.
  • Power Factor Improvement.

Condition Monitoring And Diagnostics

  • Partial Discharge
  • Insulation Resistance Monitoring
  • Correction for Winding Temperature
  • Insulation Contamination
  • IR Test Connections
  • Typical IR Testing Program
  • DC HI-POT TEST
  • Maximum Allowable Test Voltage
  • Measuring Insulation Degradation
  • Capacitive Charging Current
  • Resistive Leakage Current
  • Insulation Power Factor
  • Insulation Power Factor Standards
  • Power Factor Test Sets
  • Outage for Scheduled Maintenance
  • On Line Measuring Partial Discharge Activity (PDA) For Insulation
  • Motor Current Signature Analysis (MCSA)

Maintenance of HT Induction Motors

  • Maintenance Requirements
  • Cleaning Motors
  • Care of Stator Windings
  • Care of Rotor Winding
  • Motor Shaft Currents
  • Inspecting Motor Bearings.
  • Different Electrical Testing.
  • Electrical Preventive Maintenance Work Instructions.
  • Troubleshooting Electric Motors.
  • Motor Failures
  • Insulation failure
  • Over-current/overloading
  • Cable box failure
  • Rotor burnout
  • Bearings
  • Vibration
  • Induction Motors Troubleshooting Guide
  • Motors and Electrical safety

HT Motor Protection

  • Introduction
  • Motor characteristics involved in protection
  • General motor protection
  • Phase Fault Protection
  • Differential Protection
  • Ground-Fault Protection
  • Thermal And Locked-Rotor Protection
  • Locked-Rotor Protection For Large Motors (21)
  • System Unbalance And Motors
  • Unbalance And Phase Rotation Protection
  • Under-voltage Protection
  • Repetitive Starts And Jogging Protection
  • Multifunction Microprocessor Motor Protection Units
  • Practical Considerations Of Motor Protection
  • Effect On System Of Starting A Large Motor

Repeated starting

Motor Starting Currents

  • Achieving Short-Circuit Protection
  • Motor Damage
  • Motor Operation at Reduced Voltage
  • De-rating due to unbalanced currents
  • Determination of sequence currents
  • Unbalanced supply voltages and single phasing.



Related Training Courses

Course Details
  • Code EPE38
  • TIME    08:00 AM - 11:15 AM
  • DATE    Oct 28 2018 - Nov 1 2018
  • Paris , Champs Elysees
  • +44 2087206971
  • Support@bmc.net

Fees Per Person

6150 GBP + VAT
Register Now Send an Enquiry Download PDF Brochure Other Dates

Courses Search

Recent Posts

Connect with us

IFRS Preparation. (5 Days)Available in London - Dubai - Istanbul - Kuala Lumpur

Join our Civil and Construction Engineering Training Courses , Electrical and Power Engineering Training Courses and Facilities Management Training

Technical Training Courses

Newsletter