/  Cathodic Protection System in Oil and Gas Exploration Industry
Pay Attention Please ! The course location "Radisson Blu Hotel" is subject to availability . We may change the course location if there is no availability and we will let you know about the location changing directly if it changes. The exact course time will be clear before one week prior to course start date.
BMC Training provides on 13 Jan 2019 Cathodic Protection System in Oil and Gas Exploration Industry course [Oil and Gas Training] in Bali,Indonesia

Introduction 

Maintaining the ageing infrastructure such as   underground pipelines is a challenge to the oil and gas industry worldwide. Corrosion is one of the major causes of ageing the industrial infrastructures. Understanding its mechanism and how to control it, can lead to a remarkable reduce in the cost of the products. Cathodic Protection (CP) is one of the most widely used methods to control corrosion control in industry. The CP is a method of that eliminates the corrosion of metals by the application of an electric current. It is a technique that has been known for 160 years, and is extensively applied to offshore pipelines and tank farms, etc with great success. However, despite this long history and broad applicability, it is a technique that is all too often inadequately, or even improperly. Applied; with the result that structures are poorly protected or, worse, adversely interfered with.

Objectives

  • This course is designed to provide the theoretical basis and the practical ability necessary operate and maintain Cathodic Protection (CP) systems in the oil and gas surface production facilities.
  • The course provides understanding of the basic principles of corrosion and applications of galvanic and impressed current CP systems.
  • The course provides understanding of the field equipment used to monitor CP systems and how they work.
  • The course provides understanding of the various factors that impact the performance of these systems.
  • The course provides understanding of increase productivity by avoiding costly shutdowns thus reducing the cost of the overall corrosion control program.

The Content

Significance of Corrosion Control

  • Corrosion - Largest Single Cause of Plant Failure
  • Economic Effects
  • Environmental Effects
  • Safety Effects
  • Corrosion Management Preventive Strategies
  • Cost of Corrosion
  • Case Study: Catastrophic Corrosion Accidents

Corrosion & Its Control

  • Requirements for Corrosion to Occur
  • Metallurgical Factors
  • Forms of Corrosion
  • Corrosion Control Methods
  • Material Selection
  • Environmental Modification
  • Protective Coatings
  • Cathodic Protection

Corrosive Environments & Construction of Materials 

  • Atmospheric Environments
  • Marine atmospheres
  • Industrial Atmospheres
  • Underground Environments
  • Concrete Structure Environment
  • Corrosion Properties of Carbon Steels
  • Corrosion Properties of Cast Iron
  • Corrosion Properties of Stainless Steels
  • Corrosion Resistance Properties of Aluminum
  • Corrosion Properties of Copper
  • Corrosion Properties of Nickle

Section IV - Fundamentals of Cathodic Protection Systems

  • Galvanic Series
  • General Application of Cathodic Protection
  • Economic Considerations
  • Industry Standard & Codes
  • Principle of CPS
  • The Cathodic Protection Cell
  • Methods of Applying Cathodic Protection
  • Sacrificial Cathodic Protection System
  • Impressed-Current Cathodic Protection System
  • Advantages of SCPS
  • Disadvantages SCPS
  • Advantages ICCP
  • Disadvantages ICCP
  • CPS Selection
  • Basic Requirements for Cathodic Protection
  • Principles Of Cathodic Protection
  • Cathodic Protection Criteria
  • Current Rectifiers/DC Power Source
  • Applicable NACE Standard for Cathodic Protection Systems

Cathodic Protection Systems and Coatings

  • Role of Protective Coating in CPS
  • Selection Factors
  • Coating Defects
  • Coating Efficiency
  • Overvoltage
  • Cathodic Disbondment
  • Commonly used Coating in Conjunction with CPS

Cathodic Protection System Design

  • Design Factors
  • Electrolyte resistivity survey
  • Electrolyte pH survey
  • Structure versus electrolyte potential survey
  • Current requirement
  • Coating resistance
  • Protective current required
  • Sacrificial anode (galvanic) cathodic protection design
  • Impressed current cathodic protection system design
  • Soil resistivity
  • Current requirement test
  • Typical CPS Design Parameters
  • pH TESTING PROCEDURES
  • Current Requirement Testing

Anodes & Rectifiers

  • Anode Selection
  • Current output
  • Driving Potential
  • Anode life
  • Anode Shape & Dimension
  • Anode Material Cost
  • Anode Efficiency
  • Galvanic Anode Types
  • Current Requirements for ICCP System
  • Anode Materials for ICCP
  • Anode Backfilling
  • Installation of Sacrificial Anodes
  • Anode Vent Piping
  • Impressed Current Anode Beds
  • Quality Control and Quality Assurance
  • Impressed Current Rectifiers/DC Power Source

Practicing & Construction of Cathodic Protection System

  • Components of Cathodic Protection Systems
  • Essential Components
  • Isolating joints
  • Junction Boxes
  • Test stations, measuring points and coupons
  • Sleeve pipe
  • Thermite Weld
  • Earthing Systems
  • Line current measurement
  • Pipe Sleeves/Casings
  • Concrete Encased Pipe
  • Cathodic Protection Vessels & Tank Internals Vessels & Tank
  • Tanks for Storage of Chemicals
  • Water Circulating Systems
  • Heat exchangers (tube and shell)
  • Water box coatings
  • Submarine pipelines
  • Construction of Cathodic Protection Systems

Instrumentation & Safety Aspects

  • Alkalinity
  • Hydrogen Evolution
  • Chloride Evolution
  • Installation Adjacent to Telecommunication Services
  • Installation Adjacent to Railway Signal & Protection Circuits
  • Interaction at Discontinuities in Cathodically Protected Structures
  • Installation at Jetties & Ships
  • Danger of Electric Shock
  • Installations on Immersed Structures
  • Installations for the Internal Protection of Plant
  • Fault Conditions in Electricity Power Systems
  • Stray Current Corrosion
  • High Impedance Voltmeter
  • Reference Cells (Half Cells) Reference Cells

Corrosion Management Systems

  • Oilfield Cathodic Protection Systems
  • Corrosion Economy
  • Corrosion Key Performance Indicators (KPIs)
  • Asset Integrity and Corrosion Management
  • Corrosion Data Management



Related Training Courses

, -
Course Details
  • Code OGT1
  • TIME    08:00 AM - 11:15 AM
  • DATE    Jan 13 2019 - Jan 17 2019
  • Bali , Radisson Blu Hotel
  • +44 2087206971
  • Support@bmc.net

Fees Per Person

6300 GBP + VAT
Register Now Send an Enquiry Download PDF Brochure Other Dates

Courses Search

Recent Posts

Connect with us

IFRS Preparation. (5 Days)Available in London - Dubai - Istanbul - Kuala Lumpur

Join our Civil and Construction Engineering Training Courses , Electrical and Power Engineering Training Courses and Facilities Management Training

Technical Training Courses

Newsletter