Introduction To STAAD Pro Course

Gain an introduction to STAAD Pro software in this training course. Learn the basics of structural analysis and design using STAAD Pro. BMC Training offers Introduction To STAAD Pro Course in Construction and Civil Engineering Training Courses.

  • English
  • 48 Training Sessions
  • Confirmed
  • One Week
Introduction To STAAD Pro Training Course

Detailed description for visually impaired users: The image presents a view of Introduction To STAAD Pro Training Course

Type a city name or a month
Venue Start Date End Date Net Fees Details & Registration
London , UK 22 - Nov - 2026 26 - Nov - 2026 5950 GBP
Madrid , Spain 22 - Nov - 2026 26 - Nov - 2026 7500 GBP
Munich , Germany 22 - Nov - 2026 26 - Nov - 2026 8900 GBP
Berlin , Germany 22 - Nov - 2026 26 - Nov - 2026 8300 GBP
New York , United States 22 - Nov - 2026 26 - Nov - 2026 12750 GBP
Amsterdam , Netherlands 22 - Nov - 2026 26 - Nov - 2026 9100 GBP
Milan , Italy 22 - Nov - 2026 26 - Nov - 2026 7500 GBP
Dubai , UAE 29 - Nov - 2026 3 - Dec - 2026 5722.5 GBP
Paris , France 29 - Nov - 2026 3 - Dec - 2026 7900 GBP
Hong Kong , Hong Kong 29 - Nov - 2026 3 - Dec - 2026 9100 GBP
Tokyo , Japan 29 - Nov - 2026 3 - Dec - 2026 11500 GBP
Geneva , Switzerland 29 - Nov - 2026 3 - Dec - 2026 9950 GBP
Kuala Lumpur , Malaysia 6 - Dec - 2026 10 - Dec - 2026 5300 GBP
Rome , Italy 6 - Dec - 2026 10 - Dec - 2026 7900 GBP
Barcelona , Spain 6 - Dec - 2026 10 - Dec - 2026 8300 GBP
Zurich , Switzerland 6 - Dec - 2026 10 - Dec - 2026 8700 GBP
Sydney , Australia 6 - Dec - 2026 10 - Dec - 2026 12750 GBP
Dubai , UAE 13 - Dec - 2026 17 - Dec - 2026 5722.5 GBP
Paris , France 13 - Dec - 2026 17 - Dec - 2026 7900 GBP
Hong Kong , Hong Kong 13 - Dec - 2026 17 - Dec - 2026 9100 GBP
Tokyo , Japan 13 - Dec - 2026 17 - Dec - 2026 11500 GBP
London , UK 20 - Dec - 2026 24 - Dec - 2026 5950 GBP
Madrid , Spain 20 - Dec - 2026 24 - Dec - 2026 7500 GBP
Munich , Germany 20 - Dec - 2026 24 - Dec - 2026 8900 GBP
Berlin , Germany 20 - Dec - 2026 24 - Dec - 2026 8300 GBP
New York , United States 20 - Dec - 2026 24 - Dec - 2026 12750 GBP
Amsterdam , Netherlands 20 - Dec - 2026 24 - Dec - 2026 9100 GBP
Milan , Italy 20 - Dec - 2026 24 - Dec - 2026 7500 GBP
Istanbul , Turkey 27 - Dec - 2026 31 - Dec - 2026 5550 GBP
Bali , Indonesia 27 - Dec - 2026 31 - Dec - 2026 8700 GBP
Singapore , Singapore 27 - Dec - 2026 31 - Dec - 2026 8400 GBP
Washington , United States 27 - Dec - 2026 31 - Dec - 2026 13500 GBP
Dubai , UAE 27 - Dec - 2026 31 - Dec - 2026 5722.5 GBP
Paris , France 27 - Dec - 2026 31 - Dec - 2026 7900 GBP
Hong Kong , Hong Kong 27 - Dec - 2026 31 - Dec - 2026 9100 GBP
Tokyo , Japan 27 - Dec - 2026 31 - Dec - 2026 11500 GBP
Kuala Lumpur , Malaysia 27 - Dec - 2026 31 - Dec - 2026 5300 GBP
Rome , Italy 27 - Dec - 2026 31 - Dec - 2026 7900 GBP
Barcelona , Spain 27 - Dec - 2026 31 - Dec - 2026 8300 GBP
Zurich , Switzerland 27 - Dec - 2026 31 - Dec - 2026 8700 GBP
Sydney , Australia 27 - Dec - 2026 31 - Dec - 2026 12750 GBP
Interlaken , Switzerland 6 - Dec - 2026 10 - Dec - 2026 9950 GBP
Los Angeles , USA 6 - Dec - 2026 10 - Dec - 2026 12500 GBP
Geneva , Switzerland 13 - Dec - 2026 17 - Dec - 2026 9950 GBP
Taipei , Taiwan 27 - Dec - 2026 31 - Dec - 2026 12750 GBP
Geneva , Switzerland 27 - Dec - 2026 31 - Dec - 2026 9950 GBP
Interlaken , Switzerland 27 - Dec - 2026 31 - Dec - 2026 9950 GBP
Los Angeles , USA 27 - Dec - 2026 31 - Dec - 2026 12500 GBP

Course Syllabus

Course Description

This course provides an overall look over STAAD Pro 2005. It demonstrates the steps to be followed to produce the structural analysis of many types of buildings.

Also the course concentrates over the different results generated from the program, and how to read them, view them, and finally generate the necessary reports from them.

At the completion of this course, the trainee will be able to: 

  • Understand how the multipurpose finite element programs conduct the structural analysis.
  • Understand STAAD Pro way of doing the job
  • Understand STAAD Pro way of pre processing the job
  • Creating the geometry using different methods
  • Use more advanced technique in creating geometry
  • Understand STAAD Pro element library
  • Defining the Cross-Sections of Beams, Columns, Plates
  • Defining the Constants, Specifications, and Supports
  • Defining the Load Systems
  • Analyzing your Model using the appropriate Analysis method
  • Reviewing the Analysis Results

Course Objective

This course is intended to overview modern procedures for the structural analysis using different software. The course may be attended by civil engineers involved in design. Each participant may draw on the elements of the course that most complement his area of interest and practice.

For those engineers with limited design experience, the course will provide ample illustration of real structures that may assist the designer to understand STAAD Pro and apply it on different types of buildings. Different types of editing data to STAAD Pro will be discussed, and the easiest way to deal with it will be reached.

The wide range of issues to be discussed, revolve around the use of STAAD Pro in structural Analysis of different types of structures. The examples to be used would vary from the typical two-dimensional beams and frames to the three-dimensional multistory frames to special systems such as space frames and three-dimensional slabs and raft foundations. Throughout the course, the instructor shall start from the basics to allow to ensure the full participation and comprehension of all attendant, bearing in mind variations in background from education to practice.

Course Outline 

  • The stiffness method as an introduction to finite element method.
  • The finite element method used by most of the used software.
  • Presentation of some available multi-purpose finite element computer packages used in design market.
  • Introduction to STAAD Pro 2005, computer requirements and size.
  • Different methods of analysis.
  • Creating a new file with STAAD Pro, 2005.
  • Recognizing STAAD Pro, screen (Menu bar, tool bar, title bar, modes …etc.
  • Dealing with an existing file.
  • Geometry
  • This module contains:
  • Understanding STAAD Pro way
  • Defining Nodes, Beams, and Plates.
  • Arrangement of input file.
  • Using Structure Wizard to create Geometry
  • using drafting to create Geometry
  • Using Copy/Cut with Paste to create Geometry
  • Using Spreadsheet to create Geometry
  • Using DXF importing to create Geometry
  • Analysis of two-dimensional continuous beams.
  • Loads affecting beam elements.
  • Analysis of two-dimensional frames and trusses.
  • Loads affecting frames.
  • Analysis of three-dimensional frames and trusses.
  • Loads affecting frames and trusses.
  • Analysis of plate elements (slabs, flat slabs)
  • Loads affecting plate elements.
  • Dealing with output data

Related Courses

CCE34

Geometric Design Of Urban and Rural Roads Course

Develop skills in geometric design of urban and rural roads in this practical training course. Learn techniques for designing road layouts.
CCE22

Construction Management and Supervising Multiple Projects Course

Acquire expertise in supervising multiple construction projects with this specialized training course. Learn effective construction management techniques.
CCE40

Interpretation and Enforcement Of Construction Contracts For Industrial Plants Course

Understand interpretation and enforcement of construction contracts for industrial plants in this training course. Develop expertise in contract management.
CCE15

Building and Facilities Maintenance Management Course

Learn building and facilities maintenance management in this practical training course. Enhance maintenance techniques for buildings and facilities.
CCE58

Structural Steel Design - Pipe Rack, Shelters, Pipe Supports, Platforms and Ladders Course

Develop skills in structural steel design for pipe racks, shelters, pipe supports, platforms, and ladders in this practical training course. Learn effective design techniques.
CCE42

Offshore Structure Platform Design Using SACS Software Course

Learn offshore structure platform design using SACS software in this specialized training course. Develop expertise in designing offshore platforms.

Available Cities